NIST SP 800-53 Rev. 5 Common Control Library

NIST control statement

a. Establish configuration requirements, connection requirements, and implementation guidance for each type of wireless access; and b. Authorize each type of wireless access to the system prior to allowing such connections.

Discussion

Wireless technologies include microwave, packet radio (ultra-high frequency or very high frequency), 802.11x, and Bluetooth. Wireless networks use authentication protocols that provide authenticator protection and mutual authentication.

NIST control statement

Protect wireless access to the system using authentication of [Selection (one-or-more): users; devices] and encryption.

Discussion

Wireless networking capabilities represent a significant potential vulnerability that can be exploited by adversaries. To protect systems with wireless access points, strong authentication of users and devices along with strong encryption can reduce susceptibility to threats by adversaries involving wireless technologies.

NIST control statement

Withdrawn in this source release; review the official source for disposition.

NIST control statement

Disable, when not intended for use, wireless networking capabilities embedded within system components prior to issuance and deployment.

Discussion

Wireless networking capabilities that are embedded within system components represent a significant potential vulnerability that can be exploited by adversaries. Disabling wireless capabilities when not needed for essential organizational missions or functions can reduce susceptibility to threats by adversaries involving wireless technologies.

NIST control statement

Identify and explicitly authorize users allowed to independently configure wireless networking capabilities.

Discussion

Organizational authorizations to allow selected users to configure wireless networking capabilities are enforced, in part, by the access enforcement mechanisms employed within organizational systems.

NIST control statement

Select radio antennas and calibrate transmission power levels to reduce the probability that signals from wireless access points can be received outside of organization-controlled boundaries.

Discussion

Actions that may be taken to limit unauthorized use of wireless communications outside of organization-controlled boundaries include reducing the power of wireless transmissions so that the transmissions are less likely to emit a signal that can be captured outside of the physical perimeters of the organization, employing measures such as emissions security to control wireless emanations, and using directional or beamforming antennas that reduce the likelihood that unintended receivers will be able to intercept signals. Prior to taking such mitigating actions, organizations can conduct periodic wireless surveys to understand the radio frequency profile of organizational systems as well as other systems that may be operating in the area.

NIST control statement

Centrally manage [Assignment: controls and related processes].

Discussion

Central management refers to organization-wide management and implementation of selected controls and processes. This includes planning, implementing, assessing, authorizing, and monitoring the organization-defined, centrally managed controls and processes. As the central management of controls is generally associated with the concept of common (inherited) controls, such management promotes and facilitates standardization of control implementations and management and the judicious use of organizational resources. Centrally managed controls and processes may also meet independence requirements for assessments in support of initial and ongoing authorizations to operate and as part of organizational continuous monitoring. Automated tools (e.g., security information and event management tools or enterprise security monitoring and management tools) can improve the accuracy, consistency, and availability of information associated with centrally managed controls and processes. Automation can also provide data aggregation and data correlation capabilities; alerting mechanisms; and dashboards to support risk-based decision-making within the organization. As part of the control selection processes, organizations determine the controls that may be suitable for central management based on resources and capabilities. It is not always possible to centrally manage every aspect of a control. In such cases, the control can be treated as a hybrid control with the control managed and implemented centrally or at the system level. The controls and control enhancements that are candidates for full or partial central management include but are not limited to: [AC-2(1)](#ac-2.1), [AC-2(2)](#ac-2.2), [AC-2(3)](#ac-2.3), [AC-2(4)](#ac-2.4), [AC-4(all)](#ac-4), [AC-17(1)](#ac-17.1), [AC-17(2)](#ac-17.2), [AC-17(3)](#ac-17.3), [AC-17(9)](#ac-17.9), [AC-18(1)](#ac-18.1), [AC-18(3)](#ac-18.3), [AC-18(4)](#ac-18.4), [AC-18(5)](#ac-18.5), [AC-19(4)](#ac-19.4), [AC-22](#ac-22), [AC-23](#ac-23), [AT-2(1)](#at-2.1), [AT-2(2)](#at-2.2), [AT-3(1)](#at-3.1), [AT-3(2)](#at-3.2), [AT-3(3)](#at-3.3), [AT-4](#at-4), [AU-3](#au-3), [AU-6(1)](#au-6.1), [AU-6(3)](#au-6.3), [AU-6(5)](#au-6.5), [AU-6(6)](#au-6.6), [AU-6(9)](#au-6.9), [AU-7(1)](#au-7.1), [AU-7(2)](#au-7.2), [AU-11](#au-11), [AU-13](#au-13), [AU-16](#au-16), [CA-2(1)](#ca-2.1), [CA-2(2)](#ca-2.2), [CA-2(3)](#ca-2.3), [CA-3(1)](#ca-3.1), [CA-3(2)](#ca-3.2), [CA-3(3)](#ca-3.3), [CA-7(1)](#ca-7.1), [CA-9](#ca-9), [CM-2(2)](#cm-2.2), [CM-3(1)](#cm-3.1), [CM-3(4)](#cm-3.4), [CM-4](#cm-4), [CM-6](#cm-6), [CM-6(1)](#cm-6.1), [CM-7(2)](#cm-7.2), [CM-7(4)](#cm-7.4), [CM-7(5)](#cm-7.5), [CM-8(all)](#cm-8), [CM-9(1)](#cm-9.1), [CM-10](#cm-10), [CM-11](#cm-11), [CP-7(all)](#cp-7), [CP-8(all)](#cp-8), [SC-43](#sc-43), [SI-2](#si-2), [SI-3](#si-3), [SI-4(all)](#si-4), [SI-7](#si-7), [SI-8](#si-8).