VoltVerify™Compliance & Reliability Readiness PlatformVoltBreach

NIST · Shared reference library

NIST SP 800-53 Rev. 5 Common Control Library

Browse 1,193 controls and enhancements across 20 security and privacy families. Use the GovRAMP crosswalk to locate controls referenced by Security Snapshot, Core, and Moderate.

A shared catalog supports common-control planning; designation as a common, hybrid, or system-specific control depends on your organization’s implementation and inheritance decisions.

Sources and crosswalk scope

NIST OSCAL content 5.1.1+u4, retrieved 2026-09-18. GovRAMP Snapshot v1.4 and Core selection from Moderate v1.06 reference the December 2020 Rev. 5 text. Mappings establish exact identifier correspondence, not identical requirements, inherited implementation, or GovRAMP authorization. GovRAMP parameters and additional requirements remain authoritative for each program. Full Moderate, High, and other programs are not mapped here. Withdrawn controls are retained for reference.

Official pinned NIST source

SHA-256: 81cf2de45ede9aef3de7ce09d65ea9d32f662c483bbf916f6e346292b22f7763

GovRAMP readiness programsDownload GovRAMP crosswalk JSONManage organization crosswalk
Reset

9 matching controls · Page 1 of 1

Assessment, Authorization, and Monitoring · Base control

CA-7 · Continuous Monitoring

Control statement and discussion

NIST control statement

Develop a system-level continuous monitoring strategy and implement continuous monitoring in accordance with the organization-level continuous monitoring strategy that includes: a. Establishing the following system-level metrics to be monitored: [Assignment: system-level metrics]; b. Establishing [Assignment: frequencies] for monitoring and [Assignment: frequencies] for assessment of control effectiveness; c. Ongoing control assessments in accordance with the continuous monitoring strategy; d. Ongoing monitoring of system and organization-defined metrics in accordance with the continuous monitoring strategy; e. Correlation and analysis of information generated by control assessments and monitoring; f. Response actions to address results of the analysis of control assessment and monitoring information; and g. Reporting the security and privacy status of the system to [Assignment: organization-defined personnel or roles] [Assignment: organization-defined frequency].

Discussion

Continuous monitoring at the system level facilitates ongoing awareness of the system security and privacy posture to support organizational risk management decisions. The terms "continuous" and "ongoing" imply that organizations assess and monitor their controls and risks at a frequency sufficient to support risk-based decisions. Different types of controls may require different monitoring frequencies. The results of continuous monitoring generate risk response actions by organizations. When monitoring the effectiveness of multiple controls that have been grouped into capabilities, a root-cause analysis may be needed to determine the specific control that has failed. Continuous monitoring programs allow organizations to maintain the authorizations of systems and common controls in highly dynamic environments of operation with changing mission and business needs, threats, vulnerabilities, and technologies. Having access to security and privacy information on a continuing basis through reports and dashboards gives organizational officials the ability to make effective and timely risk management decisions, including ongoing authorization decisions. Automation supports more frequent updates to hardware, software, and firmware inventories, authorization packages, and other system information. Effectiveness is further enhanced when continuous monitoring outputs are formatted to provide information that is specific, measurable, actionable, relevant, and timely. Continuous monitoring activities are scaled in accordance with the security categories of systems. Monitoring requirements, including the need for specific monitoring, may be referenced in other controls and control enhancements, such as [AC-2g](#ac-2_smt.g), [AC-2(7)](#ac-2.7), [AC-2(12)(a)](#ac-2.12_smt.a), [AC-2(7)(b)](#ac-2.7_smt.b), [AC-2(7)(c)](#ac-2.7_smt.c), [AC-17(1)](#ac-17.1), [AT-4a](#at-4_smt.a), [AU-13](#au-13), [AU-13(1)](#au-13.1), [AU-13(2)](#au-13.2), [CM-3f](#cm-3_smt.f), [CM-6d](#cm-6_smt.d), [CM-11c](#cm-11_smt.c), [IR-5](#ir-5), [MA-2b](#ma-2_smt.b), [MA-3a](#ma-3_smt.a), [MA-4a](#ma-4_smt.a), [PE-3d](#pe-3_smt.d), [PE-6](#pe-6), [PE-14b](#pe-14_smt.b), [PE-16](#pe-16), [PE-20](#pe-20), [PM-6](#pm-6), [PM-23](#pm-23), [PM-31](#pm-31), [PS-7e](#ps-7_smt.e), [SA-9c](#sa-9_smt.c), [SR-4](#sr-4), [SC-5(3)(b)](#sc-5.3_smt.b), [SC-7a](#sc-7_smt.a), [SC-7(24)(b)](#sc-7.24_smt.b), [SC-18b](#sc-18_smt.b), [SC-43b](#sc-43_smt.b) , and [SI-4](#si-4).

GovRAMP crosswalk

Program Management · Base control

PM-31 · Continuous Monitoring Strategy

Control statement and discussion

NIST control statement

Develop an organization-wide continuous monitoring strategy and implement continuous monitoring programs that include: a. Establishing the following organization-wide metrics to be monitored: [Assignment: metrics]; b. Establishing [Assignment: monitoring frequencies] and [Assignment: assessment frequencies] for control effectiveness; c. Ongoing monitoring of organizationally-defined metrics in accordance with the continuous monitoring strategy; d. Correlation and analysis of information generated by control assessments and monitoring; e. Response actions to address results of the analysis of control assessment and monitoring information; and f. Reporting the security and privacy status of organizational systems to [Assignment: organization-defined personnel or roles] [Assignment: organization-defined frequency].

Discussion

Continuous monitoring at the organization level facilitates ongoing awareness of the security and privacy posture across the organization to support organizational risk management decisions. The terms "continuous" and "ongoing" imply that organizations assess and monitor their controls and risks at a frequency sufficient to support risk-based decisions. Different types of controls may require different monitoring frequencies. The results of continuous monitoring guide and inform risk response actions by organizations. Continuous monitoring programs allow organizations to maintain the authorizations of systems and common controls in highly dynamic environments of operation with changing mission and business needs, threats, vulnerabilities, and technologies. Having access to security- and privacy-related information on a continuing basis through reports and dashboards gives organizational officials the capability to make effective, timely, and informed risk management decisions, including ongoing authorization decisions. To further facilitate security and privacy risk management, organizations consider aligning organization-defined monitoring metrics with organizational risk tolerance as defined in the risk management strategy. Monitoring requirements, including the need for monitoring, may be referenced in other controls and control enhancements such as, [AC-2g](#ac-2_smt.g), [AC-2(7)](#ac-2.7), [AC-2(12)(a)](#ac-2.12_smt.a), [AC-2(7)(b)](#ac-2.7_smt.b), [AC-2(7)(c)](#ac-2.7_smt.c), [AC-17(1)](#ac-17.1), [AT-4a](#at-4_smt.a), [AU-13](#au-13), [AU-13(1)](#au-13.1), [AU-13(2)](#au-13.2), [CA-7](#ca-7), [CM-3f](#cm-3_smt.f), [CM-6d](#cm-6_smt.d), [CM-11c](#cm-11_smt.c), [IR-5](#ir-5), [MA-2b](#ma-2_smt.b), [MA-3a](#ma-3_smt.a), [MA-4a](#ma-4_smt.a), [PE-3d](#pe-3_smt.d), [PE-6](#pe-6), [PE-14b](#pe-14_smt.b), [PE-16](#pe-16), [PE-20](#pe-20), [PM-6](#pm-6), [PM-23](#pm-23), [PS-7e](#ps-7_smt.e), [SA-9c](#sa-9_smt.c), [SC-5(3)(b)](#sc-5.3_smt.b), [SC-7a](#sc-7_smt.a), [SC-7(24)(b)](#sc-7.24_smt.b), [SC-18b](#sc-18_smt.b), [SC-43b](#sc-43_smt.b), [SI-4](#si-4).

GovRAMP crosswalk

Not selected in the imported Snapshot or Core sets. This does not establish exclusion from other GovRAMP baselines.

System and Communications Protection · Base control

SC-18 · Mobile Code

Control statement and discussion

NIST control statement

a. Define acceptable and unacceptable mobile code and mobile code technologies; and b. Authorize, monitor, and control the use of mobile code within the system.

Discussion

Mobile code includes any program, application, or content that can be transmitted across a network (e.g., embedded in an email, document, or website) and executed on a remote system. Decisions regarding the use of mobile code within organizational systems are based on the potential for the code to cause damage to the systems if used maliciously. Mobile code technologies include Java applets, JavaScript, HTML5, WebGL, and VBScript. Usage restrictions and implementation guidelines apply to both the selection and use of mobile code installed on servers and mobile code downloaded and executed on individual workstations and devices, including notebook computers and smart phones. Mobile code policy and procedures address specific actions taken to prevent the development, acquisition, and introduction of unacceptable mobile code within organizational systems, including requiring mobile code to be digitally signed by a trusted source.

GovRAMP crosswalk

System and Communications Protection · Enhancement

SC-18(1) · Identify Unacceptable Code and Take Corrective Actions

View parent control
Control statement and discussion

NIST control statement

Identify [Assignment: unacceptable mobile code] and take [Assignment: corrective actions].

Discussion

Corrective actions when unacceptable mobile code is detected include blocking, quarantine, or alerting administrators. Blocking includes preventing the transmission of word processing files with embedded macros when such macros have been determined to be unacceptable mobile code.

GovRAMP crosswalk

Not selected in the imported Snapshot or Core sets. This does not establish exclusion from other GovRAMP baselines.

System and Communications Protection · Enhancement

SC-18(2) · Acquisition, Development, and Use

View parent control
Control statement and discussion

NIST control statement

Verify that the acquisition, development, and use of mobile code to be deployed in the system meets [Assignment: mobile code requirements].

Discussion

None.

GovRAMP crosswalk

Not selected in the imported Snapshot or Core sets. This does not establish exclusion from other GovRAMP baselines.

System and Communications Protection · Enhancement

SC-18(3) · Prevent Downloading and Execution

View parent control
Control statement and discussion

NIST control statement

Prevent the download and execution of [Assignment: unacceptable mobile code].

Discussion

None.

GovRAMP crosswalk

Not selected in the imported Snapshot or Core sets. This does not establish exclusion from other GovRAMP baselines.

System and Communications Protection · Enhancement

SC-18(4) · Prevent Automatic Execution

View parent control
Control statement and discussion

NIST control statement

Prevent the automatic execution of mobile code in [Assignment: software applications] and enforce [Assignment: actions] prior to executing the code.

Discussion

Actions enforced before executing mobile code include prompting users prior to opening email attachments or clicking on web links. Preventing the automatic execution of mobile code includes disabling auto-execute features on system components that employ portable storage devices, such as compact discs, digital versatile discs, and universal serial bus devices.

GovRAMP crosswalk

Not selected in the imported Snapshot or Core sets. This does not establish exclusion from other GovRAMP baselines.

System and Communications Protection · Enhancement

SC-18(5) · Allow Execution Only in Confined Environments

View parent control
Control statement and discussion

NIST control statement

Allow execution of permitted mobile code only in confined virtual machine environments.

Discussion

Permitting the execution of mobile code only in confined virtual machine environments helps prevent the introduction of malicious code into other systems and system components.

GovRAMP crosswalk

Not selected in the imported Snapshot or Core sets. This does not establish exclusion from other GovRAMP baselines.

System and Information Integrity · Base control

SI-4 · System Monitoring

Control statement and discussion

NIST control statement

a. Monitor the system to detect: 1. Attacks and indicators of potential attacks in accordance with the following monitoring objectives: [Assignment: monitoring objectives] ; and 2. Unauthorized local, network, and remote connections; b. Identify unauthorized use of the system through the following techniques and methods: [Assignment: techniques and methods]; c. Invoke internal monitoring capabilities or deploy monitoring devices: 1. Strategically within the system to collect organization-determined essential information; and 2. At ad hoc locations within the system to track specific types of transactions of interest to the organization; d. Analyze detected events and anomalies; e. Adjust the level of system monitoring activity when there is a change in risk to organizational operations and assets, individuals, other organizations, or the Nation; f. Obtain legal opinion regarding system monitoring activities; and g. Provide [Assignment: system monitoring information] to [Assignment: personnel or roles] [Selection (one-or-more): as needed; [Assignment: frequency] ].

Discussion

System monitoring includes external and internal monitoring. External monitoring includes the observation of events occurring at external interfaces to the system. Internal monitoring includes the observation of events occurring within the system. Organizations monitor systems by observing audit activities in real time or by observing other system aspects such as access patterns, characteristics of access, and other actions. The monitoring objectives guide and inform the determination of the events. System monitoring capabilities are achieved through a variety of tools and techniques, including intrusion detection and prevention systems, malicious code protection software, scanning tools, audit record monitoring software, and network monitoring software. Depending on the security architecture, the distribution and configuration of monitoring devices may impact throughput at key internal and external boundaries as well as at other locations across a network due to the introduction of network throughput latency. If throughput management is needed, such devices are strategically located and deployed as part of an established organization-wide security architecture. Strategic locations for monitoring devices include selected perimeter locations and near key servers and server farms that support critical applications. Monitoring devices are typically employed at the managed interfaces associated with controls [SC-7](#sc-7) and [AC-17](#ac-17) . The information collected is a function of the organizational monitoring objectives and the capability of systems to support such objectives. Specific types of transactions of interest include Hypertext Transfer Protocol (HTTP) traffic that bypasses HTTP proxies. System monitoring is an integral part of organizational continuous monitoring and incident response programs, and output from system monitoring serves as input to those programs. System monitoring requirements, including the need for specific types of system monitoring, may be referenced in other controls (e.g., [AC-2g](#ac-2_smt.g), [AC-2(7)](#ac-2.7), [AC-2(12)(a)](#ac-2.12_smt.a), [AC-17(1)](#ac-17.1), [AU-13](#au-13), [AU-13(1)](#au-13.1), [AU-13(2)](#au-13.2), [CM-3f](#cm-3_smt.f), [CM-6d](#cm-6_smt.d), [MA-3a](#ma-3_smt.a), [MA-4a](#ma-4_smt.a), [SC-5(3)(b)](#sc-5.3_smt.b), [SC-7a](#sc-7_smt.a), [SC-7(24)(b)](#sc-7.24_smt.b), [SC-18b](#sc-18_smt.b), [SC-43b](#sc-43_smt.b) ). Adjustments to levels of system monitoring are based on law enforcement information, intelligence information, or other sources of information. The legality of system monitoring activities is based on applicable laws, executive orders, directives, regulations, policies, standards, and guidelines.

GovRAMP crosswalk